Installation guide

Have you just received your Eye Lights and want to use it immediately? This quick installation guide is for you!

Make sure you have all the hardware in the pack and then carefully follow the steps so below to get on the road safely with EYE LIGHTS!

Pack content

glimpse

ATTENTION

Do not pull the video cable, this element is sensitive and very fragile.
Remember to recharge your EyeRide 4 hours before the first use.

To ensure maximum safety, any manipulation of the product must be done when turned off.

OS minimum version: Android 9.0 or IOS 11

Android and IOS appairing

1

On Android: Download and launch the Android Auto app

2

WiFi

Turn on WiFi on your phone without selecting a network. Be careful not to be connected to an existing WiFi network so you don't create connection conflicts.

3

Bluetooth

Then turn on Bluetooth, then select the EyeRide from the device list. After a few seconds (up to one minute for the first pairing), your smartphone will ask you for permission to pair: accept the pairing and after a few seconds, Android Auto or Apple Carplay appears in your prism, so it is correctly connected.

Tip: If you want to save your phone's battery, be aware that using Bluetooth is no longer necessary once your EyeRide is paired (in case you don't use the Bluetooth remote)

4

Video guide

Would you rather be guided on video? It's this way.

ENGLISH

WATCH NOW

ESPANOL

WATCH THE VIDEO

GERMAN

look

日本語

今観日本語る